Instructions for carrying and installing the compact post

rn* First, we connect special straps for carrying the kennel to 4 hooks on the sides of the post by Shigel
n*Then we close the post doors completely and fix them together with bolts and nuts, it should be noted that during this work, if there is a transformer in the post, its connections should also be carefully checked.
n*Connect the straps completely flat so that they are at least one meter higher than the roof of the gantry
n* Carefully lift the post with a crane and place it on the vehicle
n* Avoid sudden turns and braking along the route because it will change the condition of the garage and cause an accident
n* Make sure the foundation is level before placing it on the foundation when emptying the condo
n* If it is not level, use level plates to level the set, otherwise the door adjustment will be messed up and irreparable blows will be inflicted on the doors.
n* Place the post gently on the platform so as not to damage its internal equipment
n* To connect to the foundation, weld the straps installed in the four corners of the chassis to the foundation column plates.
n* Be careful not to weld the post on the electroplated chassis
n* It is designed to connect the input cables to the manhole valve panel for the passage of the operator
n* In order to earth the door of the cells or connect and disconnect the keys, be sure to read the instructions installed on the device
n* After performing the operator operation, put the disconnecting and connecting handle in the right place
n* At the end of the work, padlocks should be used for the security of the post equipment
rn